Metal Coil for Industrial Sewing Machine

Industrial coil: the basis for a uniform seam in continuous work

In an industrial straight sewing machine, the coil rotates very quickly, for hours in a row, so every small deviation in it is felt in the seam. The industrial metal coil is built for this kind of work: a stable metal body, flat and smooth sides without holes, and a central hole with a small locking groove in the wall, which catches the end of the thread at the beginning of the winding. This way the thread does not slip at the beginning of the winding, and the coil fills evenly.

The smooth sides and precise finish help the wire come out of the coil smoothly and evenly, which is what prevents bouncy tension in the bottom wire. Factories and studios usually have several pre-coiled coils next to each machine, so replacing a coil takes seconds.

What characterizes it

• Silver Finish Metal: A sturdy and durable coil for extended work.
• Flat and smooth sides: No holes, for uniform feed of the wire.
• Center hole with locking slot: to fix the end of the thread at the beginning of winding.

Common Uses

• Additional coils for industrial straight sewing machine.
• Replacing a coil that has been damaged, warped, or scratched.
• Preparation of pre-wrapped coils in the main yarn colors.

Who is it suitable for

For sewing factories and workshops, tailors and repair shops that work with an industrial machine, for fashion studios and for sewing machine technicians. Industrial coils are not suitable for home machines, so before buying, you should make sure that the machine is industrial and compare it to the existing coil.

Pro Tips

• Comparison to the original coil: Check the diameter, height and shape of the walls against the coil in the machine. If in doubt, send us a photo on WhatsApp.
• Correct winding: Run the end of the wire through the slot, twist a few turns by hand, and only then turn on the winder of the machine.
• Do not fill all the way: Too full coil rubs the coil housing and disrupts the tension. Leave a small gap from the edge of the wall.
• Ready-made coils: Wrap a few coils in advance in common colors, and keep them in a closed box so that they do not fill with dust.

Common mistakes

• Using a crooked coil: A coil that fell on the floor and was damaged rotates unevenly. It is replaced.
• Wrap a new thread on old residues: the bottom layer remains uneven. Remove the residue first.
• Tension-free winding: A loose wire on the coil comes out in jumps. Wind through the winder's tension guide.

How it differs from the rest of the reels on the site

It is the only coil on the site designed for industrial machinery, with smooth sides without holes. Next to it is a metal coil for a domestic machine with perforated walls, and atransparent plastic coil for household machinery. All coils and coil housings are in the category of coils and coil housings.

Type: Coil (Bobbin)

Designed for: Industrial Sewing Machine

Material: Metal

Finish: Silver

Sides: Flat and smooth, no holes

Center hole: with locking slot to fix the end of the wire

SKU: 452250

Sales Unit: Per Unit