Metal Bobbin for Industrial Sewing Machines

Industrial bobbin: the basis for a uniform seam in continuous work

In an industrial straight sewing machine, the bobbin rotates very quickly, for hours in a row, so every small deviation in it is felt in the seam. The industrial metal bobbin is built for this kind of work: a stable metal body, flat and smooth sides without holes, and a central hole with a small locking groove in the wall, which catches the end of the thread at the beginning of the winding. This way the thread does not slip at the beginning of the winding, and the bobbin fills evenly.

The smooth sides and precise finish help the wire come out of the bobbin smoothly and evenly, which is what prevents bouncy tension in the bottom wire. Factories and studios usually have several pre-coiled bobbins next to each machine, so replacing a bobbin takes seconds.

What characterizes it

• Silver Finish Metal: A sturdy and durable bobbin for extended work.

• Flat and smooth sides: No holes, for uniform feed of the wire.

• Center hole with locking slot: to fix the end of the thread at the beginning of winding.

Common Uses

• Additional bobbins for industrial straight sewing machine.

• Replacing a bobbin that has been damaged, warped, or scratched.

• Preparation of pre-wrapped bobbins in the main yarn colors.

Who is it suitable for

For sewing factories and workshops, tailors and repair shops that work with an industrial machine, for fashion studios and for sewing machine technicians. Industrial bobbins are not suitable for home machines, so before buying, you should make sure that the machine is industrial and compare it to the existing bobbin.

Pro Tips

• Comparison to the original bobbin: Check the diameter, height and shape of the walls against the bobbin in the machine. If in doubt, send us a photo on WhatsApp.

• Correct winding: Run the end of the wire through the slot, twist a few turns by hand, and only then turn on the winder of the machine.

• Do not fill all the way: Too full bobbin rubs the bobbin housing and disrupts the tension. Leave a small gap from the edge of the wall.

• Ready-made bobbins: Wrap a few bobbins in advance in common colors, and keep them in a closed box so that they do not fill with dust.

Common mistakes

• Using a crooked bobbin: A bobbin that fell on the floor and was damaged rotates unevenly. It is replaced.

• Wrap a new thread on old residues: the bottom layer remains uneven. Remove the residue first.

• Tension-free winding: A loose wire on the bobbin comes out in jumps. Wind through the winder's tension guide.

How it differs from the rest of the reels on the site

It is the only bobbin on the site designed for industrial machinery, with smooth sides without holes. Next to it is a metal bobbin for a domestic machine with perforated walls, and atransparent plastic bobbin for household machinery. All bobbins and bobbin housings are in the category of bobbins and bobbin housings.

Type: Bobbin (Bobbin)

Designed for: Industrial Sewing Machine

Material: Metal

Finish: Silver

Sides: Flat and smooth, no holes

Center hole: with locking slot to fix the end of the wire

SKU: 452250

Sales Unit: Per Unit