הבית לבובות דיגום ותצוגה
Classic metal finger glove for sewing with round sockets
In stock
SKU: 070043
Product description
The classic thimble: round depressions from the dome to the rim
When you think of a thimble, this is the image that comes to mind: a round metal dome, covered with small round sockets . This pattern has not remained in use for generations because of the mirror. Each socket is a small hole that the tip of the needle enters and stops, so that the needle does not slip out of the thimble and does not escape to the side. Since the sockets also cover the walls, you can push the needle into the dome as well as to the side, depending on the angle that is comfortable at that moment.
This finger glove is made of metal. The body is round and full, ending in a smooth rim at the bottom, and the inside is smooth, with no bumps that rub the finger with long work. It's a thimble for everyday work: close a hem, tighten a button, fix a tear, and continue.
How it's Built
- Dome with sockets: The top surface is covered with round dimples for pushing with the tip of your finger.
- Sides with sockets: The same pattern continues to the entire perimeter, to the push from the side.
- Smooth rim: A smooth stripe at the bottom, resting on the finger without cutting it.
- Smooth Face: Suitable for prolonged use without rubbing.
Common Uses
- Manual sewing of hems, hidden stitches and lining stitching.
- Clothing repairs: buttons, hooks, buttons and tears.
- Sewing through dense fabrics, such as denim, wool, canvas, and thin leather.
- Quilting, apps and patches.
- Embroidery and handicrafts, and sewing kits for home and travel.
Who is it suitable for
The classic thimble is suitable for almost anyone who sews by hand: beginners who want a simple and clear tool, veteran seamstresses who have known this feeling for years, tailors who work on finishes, fashion students and also instructors who prepare kits for the class. It is especially suitable for those who push the needle with their fingertips, and for those who want one thimble that works from both the top and the side.
Next to the thimble, you should keep good pins, needles and scissors in one place. You will find them all in the sewing equipment category.
Pro Tips
- Measurement before ordering: Thimbles do not have a uniform size. Measure the diameter of the tip of the middle finger, and if in doubt, check the diameter of the opening with the staff.
- Fit check: Wear, lower your hand to the side of your body and move your fingers. A thimble that doesn't fall off and doesn't feel after a few minutes is the right size.
- Holding the needle: Hold the needle between your thumb and index finger, lean the back end into one socket, and push in the direction the needle is pointing.
- Choose a socket: When the needle slides, it usually rests between two sockets. Move your finger slightly until the tip goes into the hole.
- Storage: Keep the thimble in the sewing box, along with the needles, so it's on hand for any repair.
Common mistakes
- Choose a thimble that is too large: it rotates on the finger, and the needle slides just when stability is needed.
- Sew without a thimble "only for a small correction": Most of the stabbings happen in short repairs, in a thick fabric.
- Push at a sharp diagonal: pushing at a curved angle bends the needle. It is better to straighten the fabric and push straight.
- Work with the fabric in the air: A fabric that is placed on a table allows for an even seam and a more comfortable push.
How is this model different from the checkered finger glove
There are two closed metal finger gloves on site. This model is the classic: round sockets cover the dome and the sides, the body is round and full, and at the bottom there is a smooth rim. In the second model, the dome is embedded in acheckered grid, the sides are grooved with vertical grooves, and the shape is slightly narrower at the top. The round sockets catch the needle in the same way from any direction, so it is convenient for those who change push angles while working. The slots in the checkered model give a more distinct grip sensation on the sides. And for those who want to leave the tip of their finger free, there is also an open thimble with a dotted surface.
Specifications
Type: Closed Thimble (Finger Glove), Classic Pattern
Material: Metal
Dome and sides: round sockets for the entire area
Bottom Lip: Smooth Stripe
Face: Smooth
Usage: Hand Sewing, Repairs, Quilting & Embroidery
SKU: 070043
Sales Unit: Per Unit
Frequently asked questions
Frequently asked questions
What material is the finger glove made of?
It is made of metal, with round sockets on the dome and on the sides and a smooth interior.
Why does a thimble have round depressions?
The tip of the needle enters the socket and stops in it, so the needle does not slip out of the thimble while pushing. The sockets also cover the walls, so you can push from the side as well.
On which finger is the thimble worn?
When sewing clothes, it is worn on the middle finger of the hand that is sewn, and the needle is held between the thumb and the index finger.
How do you choose a size of a thimble?
Measure the diameter of the tip of the middle finger and compare it to the diameter of the thimble's opening. If in doubt, you can find out the diameter of the opening with the staff before booking.
